Anti Slip Floor Tape – Standard Grit_SKU-7956

£15.40 £10.39
Quantity:
Size / Material / Options:
Colour Choice:

Our grip tape can be applied onto most surfaces and will instantly provide high quality, anti-slip protection that meets safety standards throughout the world.

Our Anti Slip Floor Tape is extremely durable and is ideal for demanding applications.

Anti Slip Floor Tape

standard-close-up

Our grip tape can be applied onto most surfaces and will instantly provide high quality, anti-slip protection that meets safety standards throughout the world.

Colours Available

Anti-Slip-Floor-Marking-Tape

Sizes Available

25mm wide x 18.3m long

50mm wide x 18.3m long 

100mm wide x 18.3m long

150mm wide x 18.3m long

 

Why use Fabufacture’s anti slip grip tape?

  • Competitively priced
  • Available in an unlimited range of colours including clear, printed and even glow in the dark
  • Excellent performance characteristics
  • Very durable
  • Helps to meet DDA Regulations (Disability Discrimination Act 1995) and document ‘M’ of building regulations
  • Permanent adhesion
  • Ease of application

 

Yellow-fluorescent-Anti-Sli

-red-safety-grip-tape

 

 

APPLICATION INSTRUCTIONS

For best results follow the instructions below to ensure maximum performance in all environments.

 

1) Material Storage

Ensure the material is kept in dry, warm conditions in the original protective packaging.

 

2) Surface Preparation

A clean, dry surface is essential. Use an IPA (Isopropyl Alcohol) cleaner to remove all surface contaminants (paint flakes, etc) – DO NOT use methylated spirits/petrol/lighter fluid etc as these leave behind a thin, greasy residue. Ensure prepared surface is above 10°C.

 

3) Porous Surface Sealing

Porous surfaces must be sealed prior to application to prevent water attacking the adhesive. Toluene based primers are ideal. Apply a thin coat to the cleaned surface using a paint brush, then leave to dry.

 

4) Tape Application

Cut tape to the required dimensions. Peel back part of the release liner then press the adhesive firmly onto the prepared surface, and slowly keep peeling back the liner while applying the tape. Try to ensure that the tape is not taut.

 

5) Finish!

Once applied, press tape down firmly using even pressure (decorating rollers are excellent for this). We recommend sealing the edges using ‘edge fix’ as this will extend the life of the product. Only use a small amount down the edges, a thin bead.

If correctly applied, the new anti-slip surface can be walked on straight away, though you will get maximum benefit from the adhesive system after 48 hours.

 

Anti Slip Floor Tape

 

Anti Slip Floor Tape

Anti Slip Floor Tape

Anti Slip Floor Tape,Anti Slip Floor Tape,Anti Slip Floor Tape,Anti Slip Floor Tape,Anti Slip Floor Tape,

5S, 5S & 6S, All Products, Anti Slip Floor Tape, Floor Marking, Lane / Aisle Marking Tapes, SET IN ORDER, Tapes

1 1